VenoBotic

VenoBotic is developing LineGuard, a bedside system that automates blood sampling and saline flushing through a central venous access device. A reusable control unit pairs with a disposable fluid-path set for each patient, reducing manual handling for clinical staff. Zeron defined the hardware components & developed the Human user interface for the system. The system passed EMC & Safety standards and is ready for first human trails.

Concept render of the LineGuard bedside cart with syringes, blue-capped sample tubes and touchscreen

Production:

Human trail development

Communication:

USB, Canbus & RS485

Chip:

Rassbery Pi – CM4 & Duet

Design & Engineering partner:

Taga

Development languages:

Python & G-code

LineGuard control electronics and system design

LineGuard has two parts: a reusable bedside control unit and a disposable fluid-path set, replaced for each patient. The unit automates blood-tube handling and syringe-based flushing, with motorized valves routing fluid through the catheter line. The design includes sensors for pressure, flow, air bubbles and tube fill. The intended users are trained clinical nurses in inpatient and ambulatory settings.

Sequence firmware and touchscreen interface

Zeron developed LineGuard’s control layer: the electronics, the firmware that runs each sampling and flushing sequence, and the touchscreen interface nurses use to run a procedure. A Linux-based main computer runs the application and UI and sends commands to a dedicated motion controller. The motion controller drives the encoder-based syringe and lifter axes over a CAN-FD bus. Smart servos operate the stopcocks, and sensors (bubble and flow, weight, blood level, colour) connect through I²C, UART, USB and analog inputs. A single 24 V supply feeds the system, which also has a hardware emergency stop. The current testbed is built mainly on off-the-shelf components, so the procedure logic can be validated before moving to custom electronics. The components come from Raspberry Pi, Waveshare, Duet3D, Nanotec, Riverdi, SONOTEC, SMD Sensors, DFRobot, TDK, Siemens and TE Connectivity. The system has passed EMC & Safety and will be moving in the coming months to human trials

Explore Our Other Projects